TT Plus Legend
“…we salute you!”
Trademarks: Hot T-Top style. Raw, aggressive tone. Enhanced midrange.
Styles: 70's Rock & Blues
Output: Medium (both pickups)
Retail price: From 340 Euros (without VAT) per set
Our hotter TT set, with balanced coils, is also based on the famous humbuckers with the "T"-marked black coils, but more of those of the rocking 70's. Warm sound, high dynamic range, suitable for rock and hard rock tunes of the 70's, but with a different midrange spectrum due to the over-wound coils. High-quality alloy metal parts, AWG 42 "red poly" wire, correct T-marked black bobbins and an even shorter US-made 2,10" A5 cast magnet bar, for amore snarly, raw sound, are some of the key features of our 70's T legends.
The TT Plus N model delivers a hotter, bluesier sound than the regular TT N. Very suitable for overdriven sounds. When combined with our Flaming GAS humbucker in the bridge position, you get the perfect 70's and 80's hard rock HH set.
The TT Plus B bridge model offers way more midrange boosts and sizzle, a high dynamic range, and is suitable for rock and hard rock tunes of the 70's, but with a different midrange spectrum. Having enough output, TT Plus B is for the distinctive early 70's crunchy sound a'la Angus Young, Jimmy Page, etc, but also for later 70's classic and heavier rock tones as of UFO, Nazareth, etc..
The TT Plus set is available in both wax-potted and non-wax-potted versions, and in double black open coil look. Upon request, it is available with Geman silver covers.
Neck Rdc range 7,6 kOhms Neck Resonance frequency 6,2 kHz Bridge Rdc range 8,4 kOhms Bridge Resonance frequency 5,8 kHz Bar magnet alloy US A5 (1964 specs) 2,1" long Pole screw alloy 1018 Slug alloy 1215 Hookup wire Single braided Winding wire (AWG, Coating) 42 Polysol red Coils winding Balanced -
Yannis from GASPickups shows some licks over a certain tonal range playing all models from the GAS TT Pickup family
-
Introduction
For the proper installation and wiring of your GAS Pickups, we strongly recommend letting a professional luthier or electrician perform this job in order for the pickups to be installed correctly and with no damage, which would harm the pickup’s functionality and warranty.
Delivery
All GAS Legend PAFoids are delivered with proper height adjustment screws and springs. GAS Legend PAFoids accept long US 3-48 thread screws.
Wiring
GAS Legend PAFoids come with the typical single braided hook-up wire. The pickup wiring and phase are compatible with Gibson® humbuckers. All Legend PAFoids metal parts are grounded on the braided hook-up wire.
For the desired wiring diagram of your guitar, please refer to the dozens of specialized websites with such diagrams, depending on the desired pickup configuration.
Pickup height or string distance
There is a lot of conversation on this item. The fact is, there is no absolute guidance for a generic pickup height adjustment! The distance of a pickup to the strings is dependent on countless factors, such as pickup output, pickup position, string gauge, the guitar itself, the guitarist’s overall playing technique (string hitting, etc.), and the musical styles that are about to be covered. In the case of a pickup set, usually the pickup height is adjusted so all pickups show a similar output level, but this is not a rule. Our recommendation: The desired pickup height adjustment is a procedure that may last longer than you think; just start with a generic distance of 2mm on the e strings and repeat the procedure (adjust, play, listen, re-adjust) until you are satisfied. Don’t forget to adjust in small steps (e.g., one full turn of the height adjustment screw each time) in order to easily come back one step if you are not happy with the new situation. And, trust us, if you just repeat the whole thing a couple of weeks later, you will probably find yourself re-adjusting the height again. It is something that each musician should go through by himself.
Dimensions
GAS Legend PAFoids are direct replacements for Gibson® guitars and similar models. They come in 49,2mm spacing and with the traditional long-leg base plate. If you intend installing your Legends on a guitar with a shallower profile, please let us know so we may deliver your Legends with short-leg base plates.
The dimensions for the Legend PAFoids (with and without a pickup cover) are as follows (sizes in mm):
-
-
Legend PAFoid sets are mainly named with a year (e.g., 57, 59, 60, etc.). Do the relevant Legend models actually correspond to the original models of those years?
Following our main philosophy, GAS Legends are more "based on" pickups than exact reproductions. To create pickups that offer specific sound qualities, we use specs from particular eras of old, original pickups (we had the opportunity to measure and analyze many old PAFs, PAT sticker- and PAT number pickups in our lab) and finally design them with our own specs. Some sets are closer to the original (as our 59 PE set), and some are more individually designed (as our 58 set).
-
Are Legends available with covers?
All Legend sets are available in "open coil" look (double black, zebra, and double cream) or with an unpolished German silver cover. In any version, Legend PAFoids are direct replacements for original Gibson® humbuckers.
-
What are the main differences in quality between Legend PAFoids and Standard Humbuckers?
Standard Humbuckers offer our standard GAS quality by using top parts, design, and craftsmanship. Legends offer the same high quality but a higher dynamic range due to the use of exclusively ordered magnet bars, which refer to specific MMPA standards. Further on, we mostly use the standard Poly 155 wire in our standard Humbuckers, whereas in our Legends we use Heavy PVA, red Poly, and Plain enamel wire (with 50’s and 60’s specs).
-
